MOTIV PRO 40 Amp Discharge Bank (I-Charger)

MOV3390

MOTIV PRO 40 Amp Discharge Bank (Caricatore I)

94,90€ TTC

Ce produit n'est plus en stock


Nouveau

En savoir plus

This unit is assembled in the USA using heavy duty components to withstand temperature’s of 205°C (400°F) degree’s and provide you with the best possible 40A discharge to condition and lower your internal resistance of your 2S liPo battery  for that competitive edge in all forms of electric racing. Compatible with all ICharger models and carries a 90 day warranty.

 

CAUTION:

UNIT CAN EXCEED TEMPERATURES OF 82°C (180°F) DEGREE'S DURING DISGHARGE CYCLE. NEVER LEAVE UNIT UNATTENDED DURING USE AND ALWAVS USE WITH BATTERY IN A APPROVED LIPO SAFE CHARGING BAG . MOTIV RC ASSUMES NO LIABILITY FOR MISUSE OF THIS PRODUCT

 

Please use extreme caution handling the discharge bank and keep away from any flammable materials until the unit has cooled down. Also, please allow adequate airflow for the Fan under the base of the unit.

 

Never allow your battery to discharge below 3V per cell. Please discuntinue use if battery shows signs of swelling.

 

Please follow these steps tn calibrate your charger:

 

1 - Connect larger leads to part #2 of your iCharger.

2 - Connect the smaller harness to 4mm port on your power supply

3 - Select (discharge) under Program Mode

4 - Select ( to channel) Regenerative Mode

5 - Select (SET) button to calibrate charger under (Channel join). Icharger should read (Resistance or Bulbs).

6 - Set voltage limit to 24V

7 - Set Discharge current limit tn 40 Amps

 

 

Fiche technique

Utilisé CommePour le STAND

30 autres produits dans la même catégorie :