Fully waterproof design for all conditions. (Note: please clean and dry it after use for avoiding rusty connectors)
HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the CNC-machined aluminum reticular heat sink for great heat dissipation.
High reliable electronic switch design prevents mechanical switch failure due to dirt, water, dust and etc.
Built-in switch-mode BEC with switchable voltage of 6V/7.4V and cont. /peak current of 4A/6A for usage with high torque and high voltage servos.
Tunable drag brake and drag brake rate for different vehicles, tracks and control feel. Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel.
9 levels of acceleration/pun from soft to aggressive for different vehicles, tires and tracks.
Proportional brake with 9 levels of initial brake force, maximum brake force and drag brake force.
Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection.
Separate programming port to easily connect the LED program card to the ESC.
Single-button ESC programming and factory reset.
ESC programming via Hobbywing LED program card
Cont. / Peak Current: 80A / 400A
Motor Type: Brushed Motor (540 / 550 / 775 size motors)
Applications: 1/10th Rock Crawler
Motor Limit: Brushed Motor Limit with 2S LiPo / 6S NiMH: ≥10T or RPM<email@example.comV (540/550 size motors)
Brushed Motor Limit with 3S LiPo / 9S NiMH: ≥16T or RPM<firstname.lastname@example.orgV (540/550 size motors)
LiPo / NiMH Cells: 2-3S LiPo / 5-9S NiMH
BEC Output: 6V / 7.4V@ 3A (Switch-mode)
Connectors: Input End: XT60; Output End: No Connectors