Elceram Electronic Speed Controller OXIDE 1/10 G1

Electronic Speed Controller OXIDE 1/10 G1

Key Features and Specifications

• Developed especially for 1/10th professional RC cars. Buggy, Touring, Drift, etc.
• Ideal solution for high level stock racing (standard, open stock), but for modified as well
• TFT LCD color display with resolution 160 x 80 pixels.
• Size: 38,3 (L) x 34,3 (W) x 20 (H) mm.
• Weight: 45 g without wires / 75 g with wires AWG14 - 180 mm.
• Ultra low centre of gravity.
• Power supply: 2S LiPo.
• Current cont. / pulsed: 145 A / 1500 A.
• BEC: 6 - 7,4 V adjustable, 4 A cont. / 10 A peak at 125 °C.
• For sensored BLDC motors from 6T up.
• Extreme low internal resistance based on silver conductive layer.
• Advanced Cooling Technology based on Aluminium oxide Ceramic Cooler.
• Designed for high level RC racing.
• Real-time BEC volatge measurment and diagnostics.
• Motor speed curve supported.
• Zero Timing (Blinky Mode) supported.
• RPM limiter supported.
• Designed and produced in Czech Republic.
• Easy Rx calibration.
• Realtime monitoring: battery voltage, ESC and motor temperatures.
• Self-diagnostic before the race: motor temperature, sensor cable, battery.
• Post-race data evaluation.
• Easy programming: throttle, brake, boost and turbo timing, hall angle and many other functions.
• Race data logging, temperature and other curves, histograms and more.
• Adjustable maintenance reminder for easy check.
• No programming interface needed.